As always, use extra caution when you’re sawing without a blade guard. Our thanks for this new sawing angle to professional furniture maker George Vondriska. Instead of permanently mounting my 6-in. Vise to a workbench, I attached it to scrap plywood so I can clamp it wherever I need it.
The clamp’s easy to slip on and off, and you won’t have to fuss around with staples, nails or string. A board is considered “quarter-sawn” when the growth rings run, more or less, perpendicular to the face of the board. Quarter-sawn boards generally have straight grain and are https://bestwoodcarvingtool.com/best-hand-planer/ less prone to shrinkage, compared to other boards. Here’s an easier way to stain or seal chairs, lattice or anything with numerous tight recesses. Pour the stain into a clean, empty spray bottle. Spray the stain onto the project and wipe up the excess with a brush or rag.
At this point, the wood fibers are absorbing the water and should expand back to where they were originally. Continue this process and repeat by adding more water until the dents rise up to be flush with the rest of the material. There are a few things particleboard is NOT. It’s not medium density fiberboard (MDF)—a material with greater density and weight composed of more uniform particles.
- Get complete site access to video workshops, digital plans library, online archive, and more, plus the print magazine.
- The water will wick through the wood, and that’s fine.
- Complete the process by taping the last two edges together and let sit until completed.
- You’ll be able to tell how each stain looks with each finish.
- Countersunk machine screws, washers and Wing-Nuts.
This simple jig makes laying out circles a breeze. Hole through every inch mark on a ruler or yard-stick. To draw a circle, place a pin through the number “1” into the center of your board. To the radius of the circle you wish to draw, and insert a pencil into this number. Using the pin as a pivot, rotate the pencil to mark the circle.
Tired of waiting for finish to dry on one side before finishing the other side? You can purchase standoffs, but it’s also really easy to make them yourself. Drywall screws through 2-in. Sanding the inside of a hole or curved surface can be difficult.
Some types of wood filler can be hard to get off your hands after they dry, especially if you use your fingers to push it into small cracks and holes. When that happens, I reach for fine grit sandpaper and sand it off my fingers. It’s great for removing dried-on polyurethane glue and canned foam from your hands, too.
Smooth the corner with a sanding block after trimming. I mix a lot of epoxy in small batches, but I’ve seldom had the right size container on hand. I solved this problem by drilling 1-1/2-in.
Cutting a miter joint that closes up perfectly and maintains a 90 degree angle is really satisfying. Unfortunately, it doesn’t always happen. Here’s a quick fix for a slightly open miter joint; rub the shank of a screwdriver along the miter at a steep angle, from both sides of the joint.
Gluing and clamping is one the the most widely-used skills for woodworkers. Done correctly, you can make strong, lasting bonds in your projects. Done incorrectly, you’ll add additional time and frustration down the road.
